S. Guilbert, N. Gontard, and L. G. Gorris, Prolongation of the shelf-life of perishable food products using biodegradable films and coatings, LWT-Food Sci. Technol, vol.29, pp.10-17, 1996.

M. Makaremi, P. Pasbakhsh, G. Cavallaro, G. Lazzara, Y. K. Aw et al., Effect of morphology and size of halloysite nanotubes on functional pectin bionanocomposites for food packaging applications, ACS Appl. Mater. Interfaces, vol.9, pp.17476-17488, 2017.

A. Khan, R. A. Khan, S. Salmieri, C. L. Tien, B. Riedl et al., Mechanical and barrier properties of nanocrystalline cellulose reinforced chitosan based nanocomposite films, Carbohydr. Polym, vol.90, pp.1601-1608, 2012.
URL : https://hal.archives-ouvertes.fr/pasteur-00818528

V. Bertolino, G. Cavallaro, G. Lazzara, M. Merli, S. Milioto et al., Effect of the biopolymer charge and the nanoclay morphology on nanocomposite materials, Ind. Eng. Chem. Res, vol.55, pp.7373-7380, 2016.

A. Khan, T. Huq, M. Saha, R. A. Khan, M. A. Khan et al., Effect of silane treatment on the mechanical and interfacial properties of calcium alginate fiber reinforced polypropylene composite, J. Compos. Mater, vol.44, pp.2875-2886, 2010.

D. Silva, R. T. Pasbakhsh, P. Goh, K. L. Chai, S. P. Chen et al., Synthesis and characterisation of poly (lactic acid)/halloysite bionanocomposite films, J. Compos. Mater, vol.48, pp.3705-3717, 2014.

G. Gorrasi, R. Pantani, M. Murariu, P. Dubois, . Pla/h-alloysite-nanocomposite et al., Water Vapor Barrier Properties and Specific Key Characteristics, Macromol. Mater. Eng, vol.299, pp.104-115, 2014.

V. A. Cataldo, G. Cavallaro, G. Lazzara, S. Milioto, and F. Parisi, Coffee grounds as filler for pectin: Green composites with competitive performances dependent on the UV irradiation, Carbohydr. Polym, vol.170, pp.198-205, 2017.

G. Gorrasi, V. Bugatti, and V. Vittoria, Pectins filled with LDH-antimicrobial molecules: Preparation, characterization and physical properties, Carbohydr. Polym, vol.89, pp.132-137, 2012.

G. Cavallaro, D. I. Donato, G. Lazzara, and S. Milioto, Films of halloysite nanotubes sandwiched between two layers of biopolymer: From the morphology to the dielectric, thermal, transparency, and wettability properties, J. Phys. Chem. C, vol.115, pp.20491-20498, 2011.

J. M. Lagaron and A. Lopez-rubio, Nanotechnology for bioplastics: Opportunities, challenges and strategies, Trends Food Sci. Technol, vol.22, pp.611-617, 2011.

R. Pantani, G. Gorrasi, G. Vigliotta, M. Murariu, and P. Dubois, PLA-ZnO nanocomposite films: Water vapor barrier properties and specific end-use characteristics, Eur. Polym. J, vol.49, pp.3471-3482, 2013.

I. Vroman and L. Tighzert, Biodegradable polymers, Materials, vol.2, pp.307-344, 2009.

E. Ruiz-hitzky, P. Aranda, M. Darder, and G. Rytwo, Hybrid materials based on clays for environmental and biomedical applications, J. Mater. Chem, vol.20, pp.9306-9321, 2010.

J. M. Berthelot, Composite materials: Mechanical behavior and structural analysis, pp.978-979, 2012.

Y. Lvov, W. Wang, L. Zhang, and W. Fakhrullin, Halloysite clay nanotubes for loading and sustained release of functional compounds, Adv. Mater, vol.28, pp.1227-1250, 2016.

E. Abdullayev and Y. Lvov, Halloysite clay nanotubes as a ceramic 'skeleton' for functional biopolymer composites with sustained drug release, J. Mater. Chem. B, vol.1, pp.2894-2903, 2013.

W. Abdullayev, K. Sakakibara, K. Okamoto, W. Wei, K. Ariga et al., Natural tubule clay template synthesis of silver nanorods for antibacterial composite coating, ACS Appl. Mater. Interfaces, vol.3, pp.4040-4046, 2011.

G. Biddeci, G. Cavallaro, F. Di-blasi, G. Lazzara, M. Massaro et al., Halloysite nanotubes loaded with peppermint essential oil as filler for functional biopolymer film, Carbohydr. Polym, vol.152, pp.548-557, 2016.

G. Gorrasi, Dispersion of halloysite loaded with natural antimicrobials into pectins: Characterization and controlled release analysis, Carbohydr. Polym, vol.127, pp.47-53, 2015.

M. Massaro, S. Riela, S. Guernelli, F. Parisi, G. Lazzara et al., A synergic nanoantioxidant based on covalently modified halloysite-trolox nanotubes with intra-lumen loaded quercetin, J. Mater. Chem. B, vol.4, pp.2229-2241, 2016.

A. Abdulkhani, E. H. Marvast, A. Ashori, Y. Hamzeh, and A. N. Karimi, Preparation of cellulose/polyvinyl alcohol biocomposite films using 1-n-butyl-3-methylimidazolium chloride, Int. J. Biol. Macromol, vol.62, pp.379-386, 2013.

X. Qiu and S. Hu, Smart' materials based on cellulose: A review of the preparations, properties, and applications, Materials, vol.6, pp.738-781, 2013.

P. Paximada, E. Tsouko, N. Kopsahelis, A. A. Koutinas, and I. Mandala, Bacterial cellulose as stabilizer of o/w emulsions. Food Hydrocoll, vol.53, pp.225-232, 2016.

Y. Hu, J. M. Catchmark, Y. Zhu, N. Abidi, X. Zhou et al., Engineering of porous bacterial cellulose toward human fibroblasts ingrowth for tissue engineering, J. Mater. Res, vol.29, pp.2682-2693, 2014.

N. Shah, M. Ul-islam, W. A. Khattak, and J. K. Park, Overview of bacterial cellulose composites: A multipurpose advanced material, Carbohydr. Polym, vol.98, pp.1585-1598, 2013.

A. J. Brown, XLIII-On an acetic ferment which forms cellulose, J. Chem. Soc. Trans. 1886, vol.49, pp.432-439

J. Li, X. Zhang, M. Zhang, H. Xiu, and H. He, Optimization of selective acid hydrolysis of cellulose for microcrystalline cellulose using FeCl 3, BioResources, vol.9, pp.1334-1345, 2014.

J. George, K. V. Ramana, S. N. Sabapathy, J. H. Jagannath, and A. S. Bawa, Characterization of chemically treated bacterial (Acetobacter xylinum) biopolymer: Some thermo-mechanical properties, Int. J. Biol. Macromol, vol.37, pp.189-194, 2005.

S. Thambiraj and D. R. Shankaran, Preparation and physicochemical characterization of cellulose nanocrystals from industrial waste cotton, Appl. Surf. Sci, vol.412, pp.405-416, 2017.

A. Dufresne, Nanocellulose: From Nature to High Performance Tailored Materials, vol.3110254565, 2012.

E. E. Ureña-benavides, G. Davis, V. A. Ao, and C. L. Kitchens, Rheology and phase behavior of lyotropic cellulose nanocrystal suspensions, Macromolecules, vol.44, pp.8990-8998, 2011.

S. Beck-candanedo, M. Roman, and D. G. Gray, Effect of reaction conditions on the properties and behavior of wood cellulose nanocrystal suspensions, Biomacromolecules, vol.6, pp.1048-1054, 2005.

M. S. Reid, M. Villalobos, and E. D. Cranston, Benchmarking cellulose nanocrystals: From the laboratory to industrial production, Langmuir, vol.33, pp.1583-1598, 2016.

H. Yu, Z. Qin, B. Liang, N. Liu, Z. Zhou et al., Facile extraction of thermally stable cellulose nanocrystals with a high yield of 93% through hydrochloric acid hydrolysis under hydrothermal conditions, J. Mater. Chem. A, issue.1, pp.3938-3944, 2013.

M. Roman and W. T. Winter, Effect of sulfate groups from sulfuric acid hydrolysis on the thermal degradation behavior of bacterial cellulose, Biomacromolecules, vol.5, pp.1671-1677, 2004.

R. M. Sheltami, H. Kargarzadeh, I. Abdullah, and I. Ahmad, Thermal Properties of Cellulose Nanocomposites, Handbook of Nanocellulose and Cellulose Nanocomposites, vol.2, pp.523-552, 2017.

P. B. Filson and B. E. Dawson-andoh, Sono-chemical preparation of cellulose nanocrystals from lignocellulose derived materials, Bioresour. Technol, vol.100, pp.2259-2264, 2009.

F. Jiang, A. R. Esker, and M. Roman, Acid-catalyzed and solvolytic desulfation of H 2 SO 4 -hydrolyzed cellulose nanocrystals, Langmuir, vol.26, pp.17919-17925, 2010.

M. F. Rosa, E. S. Medeiros, J. A. Malmonge, K. S. Gregorski, D. F. Wood et al., Cellulose nanowhiskers from coconut husk fibers: Effect of preparation conditions on their thermal and morphological behavior, Carbohydr. Polym, vol.81, pp.83-92, 2010.

J. Araki, M. Wada, S. Kuga, and T. Okano, Flow properties of microcrystalline cellulose suspension prepared by acid treatment of native cellulose, Colloids Surf. Physicochem. Eng. Asp, vol.142, pp.75-82, 1998.

M. Martínez-sanz, A. Lopez-rubio, and J. M. Lagaron, Optimization of the nanofabrication by acid hydrolysis of bacterial cellulose nanowhiskers, Carbohydr. Polym, vol.85, pp.228-236, 2011.

H. Y. Yu, Z. Y. Qin, L. Liu, X. G. Yang, Y. Zhou et al., Comparison of the reinforcing effects for cellulose nanocrystals obtained by sulfuric and hydrochloric acid hydrolysis on the mechanical and thermal properties of bacterial polyester, Compos. Sci. Technol, vol.87, pp.22-28, 2013.

L. Brinchi, F. Cotana, E. Fortunati, and J. M. Kenny, Production of nanocrystalline cellulose from lignocellulosic biomass: Technology and applications, Carbohydr. Polym, vol.94, pp.154-169, 2013.

S. Park, J. O. Baker, M. E. Himmel, P. A. Parilla, and D. K. Johnson, Cellulose crystallinity index: Measurement techniques and their impact on interpreting cellulase performance, Biotechnol. Biofuels, vol.3, issue.10, 2010.

N. Kruer-zerhusen, B. Cantero-tubilla, and D. B. Wilson, Characterization of cellulose crystallinity after enzymatic treatment using Fourier transform infrared spectroscopy (FTIR), Cellulose, vol.25, pp.37-48, 2018.

T. Kondo, The assignment of IR absorption bands due to free hydroxyl groups in cellulose, vol.4, p.281, 1997.

M. Börjesson and G. Westman, Crystalline nanocellulose: Preparation, modification, and properties, Cellulose-Fundamental Aspects and Current Trends, 2015.

W. S. Chang and H. H. Chen, Physical properties of bacterial cellulose composites for wound dressings. Food Hydrocoll, vol.53, pp.75-83, 2016.

H. L. Ornaghi, M. Poletto, A. J. Zattera, and S. J. Amico, Correlation of the thermal stability and the decomposition kinetics of six different vegetal fibers, Cellulose, vol.21, pp.177-188, 2014.

M. Aakerholm, B. Hinterstoisser, and L. Salmén, Characterization of the crystalline structure of cellulose using static and dynamic FT-IR spectroscopy, Carbohydr. Res, vol.339, pp.569-578, 2004.

E. L. Hult, T. Iversen, and J. Sugiyama, Characterization of the supermolecular structure of cellulose in wood pulp fibres, Cellulose, vol.10, pp.103-110, 2003.

C. J. Garvey, I. H. Parker, and G. P. Simon, On the interpretation of X-ray diffraction powder patterns in terms of the nanostructure of cellulose I fibres, Macromol. Chem. Phys, vol.206, pp.1568-1575, 2005.

J. He, S. Cui, and S. Wang, Preparation and crystalline analysis of high-grade bamboo dissolving pulp for cellulose acetate, J. Appl. Polym. Sci, vol.107, pp.1029-1038, 2008.

Y. Nishiyama, J. Sugiyama, H. Chanzy, and P. Langan, Crystal structure and hydrogen bonding system in cellulose I? from synchrotron X-ray and neutron fiber diffraction, J. Am. Chem. Soc, vol.125, pp.14300-14306, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00306874

A. Gregorova, Application of differential scanning calorimetry to the characterization of biopolymers. In Applications of Calorimetry in a Wide Context-Differential Scanning Calorimetry, Isothermal Titration Calorimetry and Microcalorimetry, Odile Carisse, 2013.

D. Ciolacu, F. Ciolacu, and V. I. Popa, Amorphous cellulose-Structure and characterization, Cellul. Chem. Technol, p.13, 2011.

K. S. Suslick, Effects of ultrasound on surfaces and solids, Adv. Sonochem, vol.1, pp.197-230, 1990.

J. H. Bang and K. S. Suslick, Applications of ultrasound to the synthesis of nanostructured materials, Adv. Mater, vol.22, pp.1039-1059, 2010.

T. W. Wong, L. W. Chan, S. B. Kho, and P. W. Heng, Design of controlled-release solid dosage forms of alginate and chitosan using microwave, J. Control. Release, vol.84, pp.99-114, 2002.

S. R. Kamireddy, J. Li, M. Tucker, J. Degenstein, and Y. Ji, Effects and mechanism of metal chloride salts on pretreatment and enzymatic digestibility of corn stover, Ind. Eng. Chem. Res, vol.52, pp.1775-1782, 2013.

T. Vom-stein, P. Grande, F. Sibilla, U. Commandeur, R. Fischer et al., Domínguez de María, P. Salt-assisted organic-acid-catalyzed depolymerization of cellulose, Green Chem, vol.12, pp.1844-1849, 2010.

Q. Lu, L. Tang, F. Lin, S. Wang, Y. Chen et al., Preparation and characterization of cellulose nanocrystals via ultrasonication-assisted FeCl 3 -catalyzed hydrolysis, Cellulose, vol.21, pp.3497-3506, 2014.

Y. Ma, W. Ji, X. Zhu, L. Tian, and X. Wan, Effect of extremely low AlCl 3 on hydrolysis of cellulose in high temperature liquid water, Biomass Bioenergy, vol.39, pp.106-111, 2012.

M. A. Henrique, W. P. Neto, H. A. Silvério, D. F. Martins, L. V. Gurgel et al., Kinetic study of the thermal decomposition of cellulose nanocrystals with different polymorphs, cellulose I and II, extracted from different sources and using different types of acids, Ind. Crops Prod, vol.76, pp.128-140, 2015.

M. Jonoobi, R. Oladi, Y. Davoudpour, K. Oksman, A. Dufresne et al., Different preparation methods and properties of nanostructured cellulose from various natural resources and residues: A review, Cellulose, vol.22, pp.935-969, 2015.