J. Aguilar-santillan, Elastic and hardness anisotropy and the indentation size effect of pyrite (FeS2) single crystal, Acta Materialia, vol.56, issue.11, pp.2476-2487, 2008.
DOI : 10.1016/j.actamat.2008.01.022

E. Bernhardt, On microhardness of solids at the limit of Kick's similarity law, Z Metallkd, vol.33, pp.135-144, 1941.

M. Bigerelle and K. Anselme, Bootstrap analysis of the relation between initial adhesive events and long-term cellular functions of human osteoblasts cultured on biocompatible metallic substrates, Acta Biomaterialia, vol.1, issue.5, pp.499-510, 2005.
DOI : 10.1016/j.actbio.2005.06.001

M. Bigerelle and A. Iost, Bootstrap analysis of FCGR, application to the Paris relationship and to lifetime prediction, International Journal of Fatigue, vol.21, issue.4, pp.299-307, 1999.
DOI : 10.1016/S0142-1123(98)00076-0

M. Bigerelle, K. Anselme, E. Dufresne, P. Hardouin, and A. Iost, An unscaled parameter to measure the order of surfaces: a new surface elaboration to increase cells adhesion, Biomolecular Engineering, vol.19, issue.2-6, pp.79-83, 2002.
DOI : 10.1016/S1389-0344(02)00048-5

M. Bigerelle, D. Najjar, and A. Iost, Multiscale functional analysis of wear, Wear, vol.258, issue.1-4, pp.232-239, 2005.
DOI : 10.1016/j.wear.2004.09.025

URL : https://hal.archives-ouvertes.fr/hal-01321171

M. Bigerelle, A. Gautier, and A. Iost, Roughness characteristic length scales of micro-machined surfaces: A multi-scale modelling, Sensors and Actuators B: Chemical, vol.126, issue.1, pp.126-137, 2007.
DOI : 10.1016/j.snb.2006.11.006

URL : https://hal.archives-ouvertes.fr/hal-01326529

M. Bigerelle, P. Mazeran, and M. Rachik, The first indenter-sample contact and the indentation size effect in nano-hardness measurement, Materials Science and Engineering: C, vol.27, issue.5-8, pp.1448-1451, 2007.
DOI : 10.1016/j.msec.2006.09.031

M. Bigerelle, B. Hagege, E. Mansori, and M. , Mechanical modelling of micro-scale abrasion in superfinish belt grinding, Tribology International, vol.41, issue.11, pp.992-1001, 2008.
DOI : 10.1016/j.triboint.2008.03.015

M. Bigerelle, A. Gautier, B. Hagege, J. Favergeon, and B. Bounichane, Roughness characteristic length scales of belt finished surface, Journal of Materials Processing Technology, vol.209, issue.20, pp.6103-6116, 2009.
DOI : 10.1016/j.jmatprotec.2009.04.013

M. Bigerelle, T. Mathia, and S. Bouvier, The multi-scale roughness analyses and modeling of abrasion with the grit size effect on ground surfaces, Wear, vol.286, issue.287, pp.124-135, 2012.
DOI : 10.1016/j.wear.2011.08.006

A. Fischer-cripps, A review of analysis methods for sub-micron indentation testing, Vacuum, vol.58, issue.4, pp.569-585, 2000.
DOI : 10.1016/S0042-207X(00)00377-8

A. Fischer-cripps, Critical review of analysis and interpretation of nanoindentation test data, Surface and Coatings Technology, vol.200, issue.14-15, pp.4153-4165, 2006.
DOI : 10.1016/j.surfcoat.2005.03.018

H. Gao and Y. Huang, Geometrically necessary dislocation and size-dependent plasticity, Scripta Materialia, vol.48, issue.2, pp.113-118, 2003.
DOI : 10.1016/S1359-6462(02)00329-9

P. Grau, G. Berg, W. Fraenzel, and H. Meinhard, Recording hardness testing. Problems of measurement at small indentation depths, Physica Status Solidi (a), vol.129, issue.1, pp.537-548, 1994.
DOI : 10.1179/sur.1989.5.3.213

Y. Huang, J. Shen, Y. Sun, and J. Sun, Indentation size effect of hardness of metallic glasses, Materials & Design, vol.31, issue.3, pp.1563-1566, 2010.
DOI : 10.1016/j.matdes.2009.09.046

A. Iost and R. Bigot, Indentation size effect: reality or artefact?, Journal of Materials Science, vol.41, issue.13, pp.3573-3577, 1996.
DOI : 10.1016/0956-7151(93)90100-7

J. Isselin, A. Iost, J. Golek, D. Najjar, and M. Bigerelle, Assessment of the constitutive law by inverse methodology: Small punch test and hardness, Journal of Nuclear Materials, vol.352, issue.1-3, pp.97-106, 2006.
DOI : 10.1016/j.jnucmat.2006.02.076

URL : https://hal.archives-ouvertes.fr/hal-01318107

J. Jang, B. Yoo, Y. Kim, J. Oh, I. Choi et al., Indentation size effect in bulk metallic glass, Scripta Materialia, vol.64, issue.8, pp.753-756, 2011.
DOI : 10.1016/j.scriptamat.2010.12.036

S. Jordan and C. Brown, Comparing texture characterization parameters on their ability to differentiate ground polyethylene ski bases, Wear, vol.261, issue.3-4, pp.398-409, 2006.
DOI : 10.1016/j.wear.2005.12.011

S. Kalidindi and S. Pathak, Determination of the effective zero-point and the extraction of spherical nanoindentation stress???strain curves, Acta Materialia, vol.56, issue.14, pp.3523-3532, 2008.
DOI : 10.1016/j.actamat.2008.03.036

F. Kick, Das Gesetz der proportionalen Widerstände und seine Anwendungen: Felix, 1885.

J. Kim, S. Kang, J. Lee, J. Jang, Y. Lee et al., Influence of surface-roughness on indentation size effect, Acta Materialia, vol.55, issue.10, pp.3555-3562, 2007.
DOI : 10.1016/j.actamat.2007.02.006

J. Kim, B. Lee, D. Read, and D. Kwon, Influence of tip bluntness on the size-dependent nanoindentation hardness, Scripta Materialia, vol.52, issue.5, pp.353-358, 2005.
DOI : 10.1016/j.scriptamat.2004.10.036

C. Klein and G. Cardinale, Young's modulus and Poisson's ratio of CVD diamond, Diamond and Related Materials, vol.2, issue.5-7, pp.918-923, 1993.
DOI : 10.1016/0925-9635(93)90250-6

Y. Lee, J. Hahn, S. Nahm, J. Jang, and D. Kwon, Investigations on indentation size effects using a pile-up corrected hardness, Journal of Physics D: Applied Physics, vol.41, issue.7, p.74027, 2008.
DOI : 10.1088/0022-3727/41/7/074027

X. Li and B. Bhushan, A review of nanoindentation continuous stiffness measurement technique and its applications, Materials Characterization, vol.48, issue.1, pp.11-36, 2002.
DOI : 10.1016/S1044-5803(02)00192-4

Y. Liu and A. Ngan, Depth dependence of hardness in copper single crystals measured by nanoindentation, Scripta Materialia, vol.44, issue.2, pp.237-241, 2001.
DOI : 10.1016/S1359-6462(00)00598-4

J. Marteau, B. Maxence, Y. Xia, P. Mazeran, and S. Bouvier, Quantification of first contact detection errors on hardness and indentation size effect measurements, Tribology International, vol.59, pp.154-162, 2013.
DOI : 10.1016/j.triboint.2012.06.029

N. Mukhopadhyay and P. Paufler, Micro- and nanoindentation techniques for mechanical characterisation of materials, International Materials Reviews, vol.298, issue.10, pp.209-245, 2006.
DOI : 10.2320/matertrans1989.34.135

D. Najjar, M. Bigerelle, and A. Iost, The computer-based bootstrap method as a tool to select a relevant surface roughness parameter, Wear, vol.254, issue.5-6, pp.450-460, 2003.
DOI : 10.1016/S0043-1648(03)00140-6

P. Narayan, B. Hancock, R. Hamel, T. Bergstrom, B. Childs et al., Differentiation of the surface topographies of pharmaceutical excipient compacts, Materials Science and Engineering: A, vol.430, issue.1-2, pp.79-89, 2006.
DOI : 10.1016/j.msea.2006.05.135

W. Nix and H. Gao, Indentation size effects in crystalline materials: A law for strain gradient plasticity, Journal of the Mechanics and Physics of Solids, vol.46, issue.3, pp.411-425, 1998.
DOI : 10.1016/S0022-5096(97)00086-0

B. Nowicki, Multiparameter representation of surface roughness, Wear, vol.102, issue.3, pp.161-176, 1985.
DOI : 10.1016/0043-1648(85)90216-9

H. Ohmori, K. Katahira, Y. Uehara, Y. Watanabe, and W. Lin, Improvement of Mechanical Strength of Micro Tools by Controlling Surface Characteristics, CIRP Annals, vol.52, issue.1, pp.467-470, 2003.
DOI : 10.1016/S0007-8506(07)60627-1

W. Oliver and G. Pharr, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, Journal of Materials Research, vol.XI, issue.06, pp.1564-1583, 1992.
DOI : 10.1557/S0883769400054440

URL : https://hal.archives-ouvertes.fr/hal-01518596

W. Oliver and G. Pharr, Nanoindentation in materials research: Past, present, and future, MRS Bulletin, vol.19, issue.11, pp.897-907, 2010.
DOI : 10.1088/0370-1328/78/2/302

S. Qu, Y. Huang, W. Nix, H. Jiang, F. Zhang et al., Indenter tip radius effect on the Nix???Gao relation in micro- and nanoindentation hardness experiments, Journal of Materials Research, vol.62, issue.11, pp.3423-3434, 2004.
DOI : 10.1016/S0022-5096(98)00103-3

M. Schervish, P Values: What They Are and What They Are Not, The American Statistician, vol.50, issue.3, p.203, 1996.
DOI : 10.2307/2684655

R. Scott, P. Ungar, and T. Bergstrom, Dental microwear texture analysis shows within-species diet variability in fossil hominins, Nature, vol.436, issue.7051, pp.693-695, 2005.
DOI : 10.1038/nature03822

C. Ullner, Requirement of a robust method for the precise determination of the contact point in the depth sensing hardness test, Measurement, vol.27, issue.1, pp.43-51, 2000.
DOI : 10.1016/S0263-2241(99)00054-8

P. Wei, P. Tsai, and J. Lin, Micro-contact analysis for the initial contact in nanoindentation tests, Tribology International, vol.41, issue.12, pp.1247-1254, 2008.
DOI : 10.1016/j.triboint.2008.04.004

T. Zhang, W. Xu, and M. Zhao, The role of plastic deformation of rough surfaces in the size-dependent hardness, Acta Materialia, vol.52, issue.1, pp.57-68, 2004.
DOI : 10.1016/j.actamat.2003.08.026

T. Zhanga and W. Xu, Surface Effects on Nanoindentation, Journal of Materials Research, vol.307, issue.07, p.1716, 2002.
DOI : 10.1016/0956-7151(93)90100-7